C.A Technologies 15 gallon (NON-ASME) Air Agitated Pressure Tank - SINGLE REGULATED 3575 PSI you’ll just loosen the 4

you’ll just loosen the 4 bolts under the motor about 2 threads – turn the adjustment bolt on the end of the belt tensioner assembly using a ¾” wrench until desired tension alignment is achieved – re-tighten the 4 motor mount bolts – and you’re done

Cutter Options

7 hp for gas engines)

Rear cover with oil drain outlet

By filtering out unwanted particles

C.A Technologies 15 gallon (NON-ASME) Air Agitated Pressure Tank - SINGLE REGULATED 3575 PSI you’ll just loosen the 4IMPORTANT NOTE: IF THIS PRESSURE TANK IS TO BE USED FOR SPRAYING FLAMMABLE MATERIALS, OPERATOR MUST NOT PRESSURIZE THIS TANK MORE THAN 15 PSI TO MEET OSHA REQUIREMENTS. FOR NON ASME PRESSURE VESSELS. IT IS THE RESPONSIBILITY OF THE OPERATOR TO FOLLOW THIS MANDATORY PROCEDURE. This pressure tank is equipped with either single or double air pressure regulation, material outlet shutoff valves for 2 guns, pressure safety relief valve, disposable plastic